Passive CO₂ capture and mineralization on existing mineral building surfaces: A falsifiable framework for Low-Operational-Energy carbon removal
DOI:
https://doi.org/10.5281/zenodo.22369302Keywords:
direct air capture, mineral carbonation, building envelope, moisture swing, passive carbon removalAbstract
Active direct air capture requires dedicated air contact, sorbent regeneration, and associated operational energy. This study theoretically examines a complementary concept in which existing mineral building surfaces act as distributed passive air contactors. The proposed Passive Carbon Skin architecture spatially separates reversible atmospheric CO₂ capture, climate-mediated carbon transfer, and mineral fixation within a Ca- or Mg-rich reservoir. Rather than claiming a validated material, the study defines a falsifiable system framework, closed carbon-balance boundary, theoretical capacity limits, climate-dependent operability variables, and an experimental validation pathway. For an illustrative Mg(OH)₂-based baseline containing 180 g Mg(OH)₂ m⁻², the stoichiometric storage ceiling is approximately 136 g CO₂ m⁻²; achievable retention remains unknown and depends on reaction kinetics, thermohygrometric cycling, transfer efficiency, passivation, weathering, and material lifetime. Four quantitative screening elements are introduced: an annualized capacity relation separating storage capacity from fill time; a mass-normalized carbon-intensity ceiling constraining embodied burden; a climate-operability state space based on experimentally validated thermal-humidity cycles; and timescale ratios requiring capture and transfer kinetics to fit within naturally available dry and wet periods. Five core hypotheses test collector performance, bounded climatic operation, interlayer carbon transfer, architectural advantage, and durable net removal. The framework requires environmental vetoes and predefined failure thresholds. It is intended not as a replacement for engineered direct air capture, but as a testable route toward complementary distributed carbon removal using existing surface area and naturally occurring environmental gradients.
Downloads
References
Alam, M. S., & Abbasabadi, N. (2026). A CFD-integrated parametric framework for evaluating passive carbon-capture enclosure performance. Architecture, 6(2), 65. https://doi.org/10.3390/architecture6020065
An, K., Brechtl, J., Kowalski, S., Yang, C.-M., Kidder, M. K., Tsouris, C., Janke, C., Lamm, M., Copenhaver, K., Thompson, J., Turnaoglu, T., Fricke, B., Li, K., Sun, X., & Nawaz, K. (2024). A multifunctional rooftop unit for direct air capture. Environmental Science: Advances, 3, 937–949. https://doi.org/10.1039/D4VA00013G
Criado, Y. A., García, R., & Abanades, J. C. (2025). Experimental demonstration of an air contactor to capture CO₂ from the atmosphere using Ca(OH)₂ solid forms. Chemical Engineering Journal, 520, 166077. https://doi.org/10.1016/j.cej.2025.166077
Erans, M., Sanz-Pérez, E. S., Hanak, D. P., Clulow, Z., Reiner, D. M., & Mutch, G. A. (2022). Direct air capture: Process technology, techno-economic and socio-political challenges. Energy & Environmental Science, 15, 1360–1405. https://doi.org/10.1039/D1EE03523A
Filahi, I., Assen, A. H., Belmabkhout, Y., & Chaouki, J. (2025). Passive adsorptive direct air capture (PADAC) using a nature-assisted temperature swing process: A sustainable solution for residential CO₂ emissions. Energy Conversion and Management, 338, 119925. https://doi.org/10.1016/j.enconman.2025.119925
Finley, D. S., & Geyer, J. (2024). Mineral surface coating for a roof system to absorb carbon dioxide (U.S. Patent Application Publication No. US20240240461A1). The Garland Company, Inc. https://patents.google.com/patent/US20240240461A1/en
Hegarty, J., Barsoum, M. L., Burrill, M., Shen, C., Farha, O. K., Haile, S. M., & Dravid, V. P. (2026). Structure–property relationships for moisture-swing direct air capture. Environmental Science & Technology, 60(16), 12145–12157. https://doi.org/10.1021/acs.est.5c16820
Liang, Y., Liu, P., Liu, Y., Xia, Z., Hu, C., Liu, Z., Wang, F., & Hu, S. (2025). Preparation of carbon capture coating for concrete from γ-C₂S and styrene-acrylic copolymer latex. Journal of Building Engineering, 112, 113928. https://doi.org/10.1016/j.jobe.2025.113928
Luong, N. T., Veyret, N., & Boily, J.-F. (2023). CO₂ mineralization by MgO nanocubes in nanometric water films. ACS Applied Materials & Interfaces, 15(38), 45055–45063. https://doi.org/10.1021/acsami.3c10590
Mao, Z., Huang, L., Zheng, Q., & Wang, Q. (2026). Moisture swing adsorption materials for direct air capture: A critical review. Energy & Fuels, 40(11), 5424–5436. https://doi.org/10.1021/acs.energyfuels.5c06243
Peng, L., Shen, P., Poon, C. S., Zhao, Y., & Wang, F. (2023). Development of carbon capture coating to improve the durability of concrete structures. Cement and Concrete Research, 168, 107154. https://doi.org/10.1016/j.cemconres.2023.107154
Schäfer, R. (2026). Passive Carbon Skin: Retrofit spray-applied CO₂ functional coating for existing roofs and mineral exterior surfaces (Public Research & Development Proposal, English Public Edition, Version 0.1). Zenodo. https://doi.org/10.5281/zenodo.21847609
Wang, T., Lackner, K. S., & Wright, A. B. (2011). Moisture swing sorbent for carbon dioxide capture from ambient air. Environmental Science & Technology, 45(15), 6670–6675. https://doi.org/10.1021/es201180v
Wang, T., Lackner, K. S., & Wright, A. B. (2013). Moisture-swing sorption for carbon dioxide capture from ambient air: A thermodynamic analysis. Physical Chemistry Chemical Physics, 15, 504–514. https://doi.org/10.1039/C2CP43124F
Zhang, S., Liu, J., Xiong, Z., Chen, X., Liu, Y., Zeng, J., & Zhuge, Y. (2026). Carbonation of Ca-rich and Mg-rich precursor: A comprehensive review, comparisons and future opportunities. npj Materials Sustainability, 4, Article 5. https://doi.org/10.1038/s44296-025-00089-1
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Journal of Green Economy and Optimization Research

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright © The Author(s).
Authors retain copyright in their work and grant the Journal of Green Economy and Optimization Research (JGEOR) the right of first publication.
Articles published in JGEOR are distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). This license permits use, sharing, adaptation, distribution, and reproduction in any medium or format, provided that appropriate credit is given to the original author(s) and the source, a link to the Creative Commons licence is provided, and any changes made are indicated.
Authors are responsible for obtaining permission to reproduce any third-party material that is not covered by the article's Creative Commons licence.




