From environmental hotspots to strategic action: a life cycle assessment of solid tyre manufacturing in Sri Lanka under EU sustainability pressures

Authors

DOI:

https://doi.org/10.68210/jgeor.a24

Keywords:

Environmental Hotspots, European Union, Life Cycle Assessment, Solid Tyres, Sustainability Pressures

Abstract

This study evaluates the cradle-to-gate environmental performance of solid tyre production in Sri Lanka, focusing on raw material extraction and manufacturing stages. A Life Cycle Assessment (LCA) was conducted in accordance with ISO 14040 and 14044 standards using the SimaPro Faculty version. The ReCiPe 2016 Midpoint (H) method was employed to quantify 18 environmental impact categories. Primary data were collected from a leading Sri Lankan solid tyre manufacturing facility and supplemented with secondary data from Ecoinvent V3.11. This study is the first to assess the environmental impacts of solid tyre production in Sri Lanka. The total global warming potential was 160.94 kg CO₂-eq per solid tyre produced. The study finds that key raw materials such as carbon black, SBR, crumb rubber, and chemical additives, along with energy-intensive processes, drive most impacts. The findings suggest replacing high-impact materials with cleaner or bio-based ones and shifting to renewable energy like solar can greatly reduce environmental impacts. These changes are environmentally and strategically beneficial, helping Sri Lanka maintain access to markets like the EU and strengthening its position as a sustainable tyre producer.

Downloads

Download data is not yet available.

Author Biographies

  • Lavangi Madhavika Bandara, Sabaragamuwa University of Sri Lanka

    Department of Tourism Management, Faculty of Management Studies, Sabaragamuwa University of Sri Lanka, Belihuloya, Sri Lanka

  • Dr. Sampath Bandara Wahala, Sabaragamuwa University of Sri Lanka

    Department of Tourism Management, Faculty of Management Studies, Sabaragamuwa University of Sri Lanka, Belihuloya, Sri Lanka

References

Bohara, K., Timilsina, A., Adhikari, K., Kafle, A., Basyal, S., Joshi, P., & Yadav, A. K. (2025). Article Citations - References - Scientific Research Publishing. Scirp.org. https://www.scirp.org/reference/referencespapers?referenceid=37174294

Bridgestone. (2023). Towards 100% sustainable materials | Value natural resources | Environment | Sustainability. Bridgestone Corporation. https://www.bridgestone.com/responsibilities/environment/resources/

Chen, L., Miller, S. A., & Ellis, B. R. (2017). Comparative Human Toxicity Impact of Electricity Produced from Shale Gas and Coal. Environmental Science & Technology, 51(21), 13018–13027. https://doi.org/10.1021/acs.est.7b03546

Chen, Z., Chen, L., Zhou, X., Huang, L., Sandanayake, M., & Yap, P.-S. (2024). Recent Technological Advancements in BIM and LCA Integration for Sustainable Construction: A Review. Sustainability, 16(3), 1340. https://doi.org/10.3390/su16031340

Coppola, A. I., Wagner, S., Lennartz, S. T., Seidel, M., Ward, N. D., Dittmar, T., Santín, C., & Jones, M. W. (2022). The black carbon cycle and its role in the Earth system. Nature Reviews Earth & Environment, 3(8), 516–532. https://doi.org/10.1038/s43017-022-00316-6

Daniela, A. L. R., Recca, G., Carbone, D., Battiato, S., Latteri, A., Cozzo, G., & Cicala, G. (2013). Environmental benefits of using ground tyre rubber in new pneumatic formulations: A life cycle assessment approach. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 229(4), 309–317. https://doi.org/10.1177/1464420713517487

Demeke, B. W., Rathore, L. S., Mekonnen, M. M., & Liu, W. (2024). Spatiotemporal dynamics of the water footprint and virtual water trade in global cotton production and trade. Cleaner Production Letters, 7, 100074. https://doi.org/10.1016/j.clpl.2024.100074

Durfor, C. N. (1963). Water Requirements of the Styrene, Butadiene and Synthetic-rubber Industries. Google Books. https://books.google.lk/books/about/Water_Requirements_of_the_Styrene_Butadi.html?id=RBH5uEuBgagC&redir_esc=y

European Commission. (2025a). Implementing the Ecodesign for Sustainable Products Regulation. Green Forum. https://green-forum.ec.europa.eu/implementing-ecodesign-sustainable-products-regulation_en

European Commission. (2025b). REACH Regulation. Environment.ec.europa.eu. https://environment.ec.europa.eu/topics/chemicals/reach-regulation_en

European Platform on LCA. (2019). EN15804 Modules Explained. Circular Ecology. https://circularecology.com/en15804-modules-explained.html

Export Development Board (EDB), Sri Lanka. (2024). Industry Capability Report–Rubber & Rubber Based Products 2024. https://www.srilankabusiness.com/ebooks/industry-capability-report-rubber-2024.pdf

Fořt, J., Kobetičová, K., Böhm, M., Podlesný, J., Jelínková, V., Vachtlová, M., Bureš, F., & Černý, R. (2022). Environmental Consequences of Rubber Crumb Application: Soil and Water Pollution. Polymers, 14(7), 1416. https://doi.org/10.3390/polym14071416

Gasparotto, J., & Da Boit Martinello, K. (2020). Coal as an energy source and its impacts on human health. Energy Geoscience, 2(2). https://doi.org/10.1016/j.engeos.2020.07.003

Harrison-Obi, C. (2019). Environmental Impact of End of Life Tyre (ELT) or Scrap Tyre Waste Pollution and the Need for Sustainable Waste Tyre Disposal and Transformation Mechanism in Nigeria . Nnamdi Azikiwe University Journal of International Law and Jurisprudence,. 60-70.

Hauschild, M. Z., Rosenbaum, R. K., & Olsen, S. I. (2018). Life Cycle Assessment (M. Z. Hauschild, R. K. Rosenbaum, & S. I. Olsen, Eds.). Springer International Publishing. https://doi.org/10.1007/978-3-319-56475-3

Hillege, L. (2025, June 23). Life Cycle Assessment Software Tools - Overview. Ecochain. https://ecochain.com/blog/life-cycle-assessment-software-overview-comparison/

International Trade Centre (ITC). (2024). Trade Map - Trade Statistics for International Business Development. Trademap.org. https://www.trademap.org/Index.aspx

ISO. (2023a). ISO 14044:2006(en) Environmental management — Life cycle assessment — Requirements and guidelines. Iso.org. https://www.iso.org/obp/ui/en/#iso:std:iso:14044:ed-1:v1:en

ISO. (2023b). Environmental management — Life cycle assessment — Principles and framework. Iso.org. https://www.iso.org/obp/ui/en/#iso:std:iso:14040:ed-2:v1:en

Janberg, W. (2024, June 24). Racing Towards Sustainability: Tyre Manufacturers’ Role in Reducing Carbon Footprint. ReportLinker. https://www.reportlinker.com/article/6646

Järlskog, I., Strömvall, A.-M., Magnusson, K., Gustafsson, M., Polukarova, M., Galfi, H., Aronsson, M., & Andersson-Sköld, Y. (2020). Occurrence of tire and bitumen wear microplastics on urban streets and in sweepsand and washwater. Science of the Total Environment, 729, 138950. https://doi.org/10.1016/j.scitotenv.2020.138950

Maxxis. (2025). How a tire is made. MAXXIS International. https://www.maxxis.com/int/technology/how-a-tire-is-made/

Mayer, P. M., Moran, K. D., Miller, E. L., Brander, S. M., Harper, S., Garcia-Jaramillo, M., Carrasco-Navarro, V., Ho, K. T., Burgess, R. M., Thornton Hampton, L. M., Granek, E. F., McCauley, M., McIntyre, J. K., Kolodziej, E. P., Hu, X., Williams, A. J., Beckingham, B. A., Jackson, M. E., Sanders-Smith, R. D., & Fender, C. L. (2024). Where the rubber meets the road: Emerging environmental impacts of Tire Wear particles and their chemical cocktails. Science of the Total Environment, 927(171153), 171153. https://doi.org/10.1016/j.scitotenv.2024.171153

Najjar, M. K., Figueiredo, K., Evangelista, A. C. J., Hammad, A. W. A., Tam, V. W. Y., & Haddad, A. (2019). Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design. International Journal of Construction Management, 22(4), 1–15. https://doi.org/10.1080/15623599.2019.1637098

Ochigbo, S. S., Lafia-Araga, R. A., & Suleiman, M. A. T. (2011). Comparison of two creaming methods for preparation of natural rubber latex concentrates from field latex. African Journal of Agricultural Research, 6(12). https://www.researchgate.net/publication/268048574_Comparison_of_two_creaming_methods_for_preparation_of_natural_rubber_latex_concentrates_from_field_latex

Official Journal of the European Union. (2023). Regulation (EU) 2023/1115 of the European Parliament and of the Council of 31 May 2023. 1–42. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32023R1115

Panda, B. K., & Sarkar, S. (2020). Environmental Impact of Rubber Plantation: Ecological Perspectives. ResearchGate, 2020–2657. https://www.researchgate.net/publication/371072223_Environmental Impact of Rubber Plantation: Ecological Vs Economical Perspectives

Perto - Digital Accessibility. (2026). Perto Digital Accessibility Widget. Continental-Tires.com; Perto - Digital Accessibility. https://www.continental-tires.com/about-us/sustainability/activities-and-initiatives/design-and-sourcing/sustainable-materials/

Public Works Construction. (2015). Asphalt Rubber Hot Mix-Gap Graded (ARHM-GG) Overlays Treatment Types. Pw.lacounty.gov. https://pw.lacounty.gov/gmed/lacroads/TreatmentAsphalt.aspx

Ruwona, W., Danha, G., & Muzenda, E. (2019). A Review on Material and Energy Recovery from Waste Tyres. Procedia Manufacturing, 35, 216–222. https://doi.org/10.1016/j.promfg.2019.05.029

Sampath, M., Niketha Konikkara, David, S., Ramakrishnan S, Rath, J. P., & Amarnath S. K. P. (2025). Advancements in sustainable materials for environmentally responsible tyre production: a comprehensive review. RSC Sustainability. https://doi.org/10.1039/d5su00177c

Shanbag, A., & Manjare, S. (2020). Life Cycle Assessment of Tyre Manufacturing Process. Journal of Sustainable Development of Energy, Water and Environment Systems, 8(1), 22–34. https://doi.org/10.13044/j.sdewes.d7.0260

Sharma, V. K., Fortuna, F., Mincarini, M., Berillo, M., & Cornacchia, G. (2000). Disposal of waste tyres for energy recovery and safe environment. Applied Energy, 65(1-4), 381–394. https://doi.org/10.1016/s0306-2619(99)00085-9

Sri Lanka Export Development Board (SLEDB). (2025). Sri Lanka’s Rubber Industry. Sri Lanka Export Development Board. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.srilankabusiness.com/ebooks/business-lanka-2025-1.pdf

Sri Lanka Rubber Industry Master Plan – 2017 – 2026 | EDB Blog. (2017, February 23). Www.srilankabusiness.com. https://www.srilankabusiness.com/blog/sri-lanka-rubber-industry-master-plan.html

talkingeconomics . (2025). talkingeconomics - EUDR in 2025: Is Sri Lanka Ready for the EU’s New Deforestation Rules? Www.ips.lk. https://www.ips.lk/talkingeconomics/2025/09/08/eudr-in-2025-is-sri-lanka-ready-for-the-eus-new-deforestation-rules/

Tarazona, J. V., Court-Marques, D., Tiramani, M., Reich, H., Pfeil, R., Istace, F., & Crivellente, F. (2017). Glyphosate toxicity and carcinogenicity: a review of the scientific basis of the European Union assessment and its differences with IARC. Archives of Toxicology, 91(8), 2723–2743. https://doi.org/10.1007/s00204-017-1962-5

Tiwari, S., Singh, S., Singh, A. K., & Srivastava, A. K. (2020, September 10). Impact of Black Carbon on Environment and Health. https://www.researchgate.net/publication/344194247_Impact_of_Black_Carbon_on_Environment_and_Health

Torretta, V., Rada, E. C., Ragazzi, M., Trulli, E., Istrate, I. A., & Cioca, L. I. (2015). Treatment and disposal of tyres: Two EU approaches. A review. Waste Management, 45, 152–160. https://doi.org/10.1016/j.wasman.2015.04.018

Uliasz-Misiak, B., Winid, B., Lewandowska-Śmierzchalska, J., & Matuła, R. (2022). Impact of road transport on groundwater quality. Science of the Total Environment, 824, 153804. https://doi.org/10.1016/j.scitotenv.2022.153804

UN Environment. (2024). Extended Producer Responsibility. International Environmental Technology Centre. https://www.unep.org/ietc/what-we-do/extended-producer-responsibility

United States Environmental Protection Agency. (2022, February 24). Human Health & Environmental Impacts of the Electric Power Sector. Www.epa.gov; United States Environmental Protection Agency. https://www.epa.gov/power-sector/human-health-environmental-impacts-electric-power-sector

Wang, Y., Hollingsworth, P. M., Zhai, D., West, C. D., Green, J. M. H., Chen, H., Hurni, K., Su, Y., Warren-Thomas, E., Xu, J., & Ahrends, A. (2023). High-resolution maps show that rubber causes substantial deforestation. Nature, 623, 1–7. https://doi.org/10.1038/s41586-023-06642-z

Weldu, Y. W., Assefa, G., & Jolliet, O. (2017). Life cycle human health and ecotoxicological impacts assessment of electricity production from wood biomass compared to coal fuel. Applied Energy, 187, 564–574. https://doi.org/10.1016/j.apenergy.2016.11.101

Yerdianti, A., & Aziz, R. (2021). Environmental impact evaluation of crumb rubber industry production process by life cycle assessment (LCA) method (case study: PT FRP). IOP Conference Series: Earth and Environmental Science, 896(1), 012046. https://doi.org/10.1088/1755-1315/896/1/012046

Zhao, C., Xu, T., He, M., Shah, K. J., You, Z., Zhang, T., & Zubair, M. (2021). Exploring the toxicity of the aged styrene-butadiene rubber microplastics to petroleum hydrocarbon-degrading bacteria under compound pollution system. Ecotoxicology and Environmental Safety, 227, 112903. https://doi.org/10.1016/j.ecoenv.2021.112903

Downloads

Published

2026-09-15

How to Cite

Bandara, L., Wahala, S., & Vijerathne, D. (2026). From environmental hotspots to strategic action: a life cycle assessment of solid tyre manufacturing in Sri Lanka under EU sustainability pressures. Journal of Green Economy and Optimization Research, 1(Special Issue 1), 90-99. https://doi.org/10.68210/jgeor.a24

Certificate of Publication